Our Products

Our Products > Flow & Level Monitoring Systems > Level Switches

TDLS01 Ultrasonic, Miniature, Liquid Level Switch


  • Microcontroller improved performance in aerated liquid
  • Input 5 to 30VDC (optional 2-wire loop power or 3.3 volt input power)
  • Relay, Sink or Source outputs (optional relay output, 1 amp SPST(NC))
  • No moving parts, easy to install
  • 250 psi Max pressure  (optional up to 500 psirating)
  • Temperature:  -29 to 80°C (optional up to 100°C)
  • Mounting:1/4” NPT, 1/2” NPT STD (standard)
  • 12 inch Cable Out (standard)

 

LF1 Level Switch


  • Rapid fluid level switch suitable for use with contaminated fluid
  • Adjustable rod height
  • Electrical:150 VDC/VAC@ 1A / 500 VDC@ 0.5A
  • Output: SPDT relay contact
  • Switchtype: Reed switch
  • Temperature range: -29°C to 80°C
  • Maximum pressure: 10 bar
  • Housing: Zinc plated steel (optional Stainless steel)
  • Protection:IP 65

TDLS02 Ultrasonic Liquid Level Switch


  • Reliable operation in virtually any liquid
  • Eliminates failure rate due to finite mechanical life inherent in the mechanical floatdesign
  • Maintenance-freeservice
  • Input 6 to 24VDC (optional 5 VDC)
  • Relay output, 1 Amp. SPDT, 2-wire loop
  • No moving parts, easy to install
  • Up to 1000 psig
  • Temperature  -29 to 80 ̊C (optional up to 100  ̊C)
  • Mounting 3/4” NPT (standard)
  • 12 inch Cable Out (standard)

RW-...HK Level Switch


  • Mechanical Level Switch in full metal design forliquids
  • Magnet-equippedfloat triggers a pre-fixed reed switch
  • Wall mounting
  • Reliable and  high temperature rating
  • Measuring materials: water, oil
  • Reed switch N.O. / N.C.
  • Max. PN 5 bar, max. temperature 120°C
  • 1/8BSPP - 1/2 BSPT male thread stainless steel
  • Liquid density 0.75 g/cm³ / 0.70 g/cm³
  • Protection:IP 65

Vibex LSV1 Vibration Level Switch


  • Ideal instrument for accurate point level detection in liquids
  • Detect the change in natural resonant frequency (1 to 200 Hz)
  • Extremely reliable
  • Setup without adjustment or calibration
  • Independent of liquid properties and installation conditions
  • 10to 55 VDC power supply
  • Switching output
  • Hysteresis:  0.08in (2mm) (with vertical installation)
  • Density:0.025 to 0.9lbs/in3
  • Dynamic viscosity:  0.1 to 10000 cP
  • Process connection: 3/4" NPT or 1" G
  • Electrical connection: M12x1, 4-Pin plug
  • Protection: IP66 / IP67

COPYRIGHT 2018 Four Star Enterprises Pte.Ltd.  |  All Rights Reserved  |  Designed & Maintained by Web Dreams Pte Ltd