Our Products

Our Products > Signal Converters > Signal Isolators

SHN-700 Programable Pulse Converter

  • can accept various of the sensors signals.
  • high accuracy (0.15%) use by B bit CPU.
  • display of frequency, scale range, and current output.
  • Setting of input frequency and K factor value easily.
  • Error compensation of input and output different and set of low limits.

P-T/C Thermocouple Transmitter

  • Convert the input signal that receives from T/C temperature sensor into isolated process signal.
  • Long distance transmission between the T/C and the transmitter.
  • A combination with intrinsic safety barriers.
  • Contains linearizer circuit.
  • 1 or 2 outputs are available from 1 input.
  • Transformer isolation type.
  • Slim wide 18mm.

P-RTD RTD Transmitter

  • Convert the input signal that receives from RTD temperature sensor into isolated process signal.
  • Long distance transmission between the RTD and the transmitter.
  • A combination with intrinsic safety barriers.
  • Contains linearizer circuit.
  • 1 or 2 outputs are available from 1 input.
  • Transformer isolation type.
  • Slim wide 18mm.

SPN-ISO Signal Transmitter, Wall Mounting

  • SPN-ISO is used to transmitted DC signal in an isolated condition.
  • Isolation between the control room and field instrumentation.
  • Input: 1-5V, 4-20mA, Other
  • Output: 1-5V x 3P, 1-5V x 4P, 4-20mA x 3P, 4-20mA x 4P
  • 3 or 4 outputs are available from 1 input.
  • Power Supply: 100VAC, 110VAC, 220VAC, 24VAC, 24VDC (Option)
  • Contains overvoltage protection circuit.
  • Transformer isolation type.

SAN-ISO 2-Wire Signal Converter (Isolator)

  • 2-wire rail mounting transmitter that receives field sensor input and provides 2-wire current loop 4-20mA.
  • Input: 1-5V, 4-20mA
  • Output: 4-20mA (DC24V): 2-Wire Loop Power
  • Isolation between the control room and field instrumentation.
  • Contains overvoltage protection circuit.
  • Transformer isolation type.
  • DIN rail mounting.

SHN-DFC DC to frequency Converter

  • Providing a pulse rate output in proportional to the DC input signal.
  • Totalizing applications by combination with a counter.
  • Low-end cut-out adjustable.
  • Frequency range adjustable with a front installed 4 rotary switches.
  • Input: 0-1V, 0-5V, 0-10V, 1-5V, 4-20mA, 0-20mA, 12-20mA, 4-12mA
  • Output: Open Collector, Voltage Pulse, Dry Contact
  • 1 or 2 outputs are available from 1 input.
  • Power Supply: 100VAC, 110VAC, 220VAC, 24VAC, 24VDC(Option)
  • Contains overvoltage protection circuit.

SSN-ISO Signal Isolator, Wall Mounting

  • Isolation between the control room and field instrumentation.
  • Input: 4-20 mA, 1-5V, Other
  • Output 1: 4-20 mA, 1-5 V, Other
  • Output 2: 4-20 mA, 1-5 V, Other, In case of needless output 2
  • 1 or 2 outputs are available from 1 input.
  • Power Supply: 100 VAC , 110VAC, 220VAC, 24 VAC, Other
  • Contains overvoltage protection circuit.
  • Transformer isolation type.

P-ISO Signal Transmitter, Compact Type

  • P-ISO is used to transmitters DC signal in an isolated condition.
  • Isolation between the control room and field instrumentation.
  • Input: 4-20 mA, 1-5 V, 1-10V, Other
  • Output 1: 4-20 mA, 1-5V, Other
  • Output 2: 4-20 mA, 1-5V, Other
  • 1 or 2 outputs are available from 1 input.
  • Contains overvoltage protection circuit.
  • Transformer isolation type.
  • Slim wide 18mm

SDL-ISO Signal Isolator, Compact Type


  • Compact size 4 digit LCDdisplay
  • Peak hold function to use various applications
  • Burnout function that give high output and display warning message when sensor line was disconnected by accident or other reasons
  • 95 to 250  VAC (50 to 60Hz ±10%) power supply
  • 4 to 20 mA or 1 to 5 V input signals (other input signals available on request)
  • 1 or 2 outputs: 4 to 20 mA, 1to 5 V output signals
  • Response time : 0.5 sec
  • Operating temperature: -20 to60°C
  • Case material: ABS Resin(black or gray)
  • Din rail mounting

SHN-ISO Signal Transmitter


  • To transmit DC signal inisolated condition
  • Isolation between controlroom and field instrumentation
  • 1 or 2 outputs are available from 1 input
  • Transformer isolation type with over voltage protection circuit
  • Universal power supply
  • 4 to 20 mA or 1 to 5 V input signals (other input signals available on request)
  • 4 to 20 mA, 1 to 5 V output signals
  • Operating temperature: -20to 60°C
  • Case material: ABS Resin (black)
  • Wall & Rail mounting


COPYRIGHT 2021 Four Star Enterprises Pte.Ltd.  |  All Rights Reserved  |  Designed & Maintained by Web Dreams Pte Ltd