Our Products

Our Products > Vibration Monitoring Systems > Vibration Sensors & Transmitters

CMCP730D Relay and Display Module

  • Universal Display and Relay Module
  • Accepts Voltage, Current, RTD or Thermocouple Inputs
  • Local LCD Display
  • Local Alert and Danger Indicators
  • 4-20mA or Voltage Output
  • Two Relay Outputs
  • Latching/Non-Latching Relays
  • Adjustable Time Delay
  • Din Rail Mountable
  • 22.5mm Wide Housing

CMCP420VT/Ex IECEx/ATEX Approved Loop-Powered Vibration Velocity Transmitter with Dynamic Output

  • IECEx and ATEX Approved (Exd)
  • 4-20mA Velocity Output
  • 100mV/g Dynamic Output
  • 2 to 2,000 Hz (120 to 120kcpm)
  • Two Ranges Available
  • Flameproof Connection Head Included
  • RoHS Compliant

CMCP700S-CV Case Vibration Transmitter

  • Accelerometer or Velocity Input
  • Acceleration, Velocity or Displacement Output
  • Single Level of Integration
  • RMS or Peak Detection
  • English or Metric Selectable
  • ISO Standard 10 Hz - 1 kHz or
  • ISO Low Frequency 2 Hz - 2 kHz
  • Selectable Filters
  • Buffered Output Terminal
  • 4 mA Sensor Power
  • Slimline DIN Rail Mount

CMCP525 Acceleration Transmitter/Monitor

  • Accelerometer Input
  • Acceleration Output (g's)
  • Transmitter or Monitor
  • RMS or Peak Detection
  • 100 mV/g Input Std.
  • 4-20 mA Output
  • 2 Buffered Outputs
  • 5 Selectable Ranges
  • Fault (OK) Detection
  • CSA & UL C1,D2
  • DIN Rail Mount
  • Optional HP & LP Filters

VT420 4-20mA Vibration Sensor

  • Monitors equipment for unwanted vibration
  • RMS vibration velocity sensor (per ISO 10816)
  • Full-scale range 2 in/S RMS
  • Vibration frequency range 10 → 1000 Hz
  • 2-wire 4-20 mA output
  • 24Vdc recommended loop power
  • IP65, NEMA 4X enclosure, -40 → 80°C
  • Optional PM500 Process Meter display
  • Connector M12, 4-pin, male, A-code
  • Housing Stainless Steel, ¼-28 mounting stud

CMCP1100C Compact Size Accelerometer, M8 Connector

  • 100 mV/g ±10%
  • Optional 10 mV/°C Temperature Output
  • 3 Pin Male Gold Plated M8 Connector, Top Exit
  • (±3dB): 0.32 Hz to 10 kHz (19.2 cpm to 600k cpm)
  • 2.5 Second Settling Time
  • -65 to +185 °F (-54 to +85 °C)
  • 1/4"-28 UNF Male Mounting Stud
  • CE Approved

CMCP786A-IP Submersible Accelerometer, Top Exit

  • Submersible Accelerometer, rated IP68
  • Top Exit, PUR Jacketed Cable
  • 100 mV/g ±10%
  • 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
  • 1.5 Seconds Setting Time
  • -67 to +284 °F (-55 to +140 °C)
  • 1/4" x 28 UNF and M8x1.25 Mounting Studs
  • Class I Division II Approved
  • Lifetime Warranty

CMCP630VP Portable Vibration Pen

  • Quick and Easy to Setup and Use
  • English or Metric Units
  • Backlit LCD Display for Low Light Conditions
  • Lightweight, Compact and Ergonomically Designed Case
  • Velocity, Acceleration and Displacement Measurements
  • Peak Hold Function
  • Hand Pressure
  • 30 Hour Battery Life (Continuous Use)
  • Rechargeable Battery
  • Conforms to ISO2372
  • Lanyard, Travel Case, Charger, Storage Bag and ISO 10816-1 Severity Chart Included

CMCP785A General Purpose, Side Exit Accelerometer

  • General Purpose Side Entry Accelerometer
  • 100 mV/g ±10% Sensitivity
  • 284 °F (140 °C) Maximum Temperature
  • ±80 g Dynamic Range
  • 2 Pin MS 5015 Connector or choice of M12 Connector or Integral Cable
  • Class 1 Division 2 Approved
  • Class 1 Division 1 Approved with IS Barrier or Isolator
  • ¼”-28 UNF or M8x1.25 Captive Mounting Bolt
  • Sealed to IP68
  • Lifetime Warranty

CMCP422VT-C Series Loop Powered Velocity Transmitter, Top Entry Connector

  • Loop Powered
  • Velocity Output (ISO 10-1.0 kHz)
  • RMS or Peak Detection
  • Top Entry, 2 Pin MS Connector
  • Optional 4 Pin M12 Eurofast Connector
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +248 °F (-25 to +120 °C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud Included

CMCP420VT Loop-Powered Vibration Velocity Transmitter with Dynamic Output

  • Velocity and Dynamic (100mV/g) Output
  • Solid State Reliability
  • 2-Wire Loop Powered (4-20mA)
  • 3/4" NPT for Conduit Connections
  • Industry Standard 1/4"x 28 UNF Stud Mounting
  • Optional Display
  • UL and CSA Approved Class 1, Division 2, Group B-D
  • CE Approved
  • RoHS Compliant
  • CMCP420VT-01 -1.00 In/Sec Full Scale (25.4mm/Sec)
  • CMCP420VT-02 - 2.00 In/Sec Full Scale (50.8mm/Sec)
COPYRIGHT 2021 Four Star Enterprises Pte.Ltd.  |  All Rights Reserved  |  Designed & Maintained by Web Dreams Pte Ltd