Our Products

Our Products > Shaft Speed Monitoring Systems > Bearing Temperature and Belt Alignment Systems

Model TA Conveyor Belt Misalignment System

  • Keeps damage costs due to belt mis-alignment low by ensuring properly aligned belt.
  • Highly visible red epoxy coated roller of 1-1/4” diameter with nylon bushings.
  • Cast aluminum housing and optional cast iron housings available.
  • Allows for shut down along entire belt length.
  • Simple Installation - drill (3) 13/32" diameter holes and mount on a conveyor
  • 3/4" NPT conduit opening
  • Roller arm can move up to 90 degrees in either direction and is spring loaded for automatic reset
  • Optional manual reset available
  • Operating temperature range: -40° F to 150° F

RTD / RTD-LT RTD Temperature Sensors with RTD Output, with and without Liquid-Tight Conduit Fittings

  • 3-wire Platinum Pt100 RTD output
  • Attachment probe, sensor and cable
  • Compatible with PLCs, meters, data acquisition, and hazard monitoring system with 3-wire Pt100 RTD- inputs
  • Integral 1/2 in. flexible liquid-tight conduit fittings (RTDZ/S-LT models)
  • Intrinsically Safe (IS) Class I, Div I (A, B, C, D),
  • Class II, Div I (E, F, G) I.S. Simple Apparatus
  • Models:
    RTDZ - 1/4 in. stainless steel probe
    RTDS - 3/8-16 threaded stud probe
    RTDZ-LT - RTDZ with a 1/8 NPT adapter and 1/2 in. flexible liquid-tight conduit fitting (e.g. grease fitting for bearing temperature)
    RTDS-LT - RTDS with a 1/2 in. flexible liquid-tight conduit fitting (e.g. belt alignment rub block temperature)

TT420-LT Temperature Sensors with 4-20 mA Output and Liquid-Tight Conduit Fittings

2-wire, loop-powered 4-20 mA analog output
  • Attachment probe, sensor, 2-wire 4-20 mA signal conditioner and conduit fitting in one
  • No user calibration: works right out of the box
  • Compatible with PLCs, meters, data acquisition, and hazard monitoring systems
  • Reverse-wiring protected
  • Integral 1/2 in flexible liquid-tight conduit fittings
  • Optimized for Class II area hazard monitor systems (e.g. grain, coal dust)
  • FM approved, Dust Ignition-proof. Class II and III, Div I (E, F, G); NEMA 4
  • 2 model families for temperature monitoring
    TT420S-LT* - 3/8 - 16 threaded stud probe (e.g. belt-alignment rub block temperature)
    TT420Z-LT* - 1/4 in stainless steel probe with 1/8 NPT adapter (e.g. zerk grease fitting for bearing temperature)

TT420 Temperature Sensors with 4-20 mA Output

  • 2-wire, loop-powered 4-20 mA analog output
  • Attachment probe, sensor, and 2-wire 4-20 mA signal conditioner in one
  • No user calibration: works right out of the box
  • Compatible with PLCs, meters, and data acquisition systems
  • Reverse-wiring protected
  • UL listed, Intrinsically Safe (IS) Class I, Div I (C, D) and Class II, Div I (E, F, G)
  • 3 Models for Industrial Temperature Monitoring
  • TT420F - flat surface mount- mounts onto any flat surface with a #10 machine screw (included)
  • TT420S - 1/4-28 threaded stud- screws into any 1/4-28 tap
  • TT420Z* - 1/4 in stainless steel probe - often used with compression fitting mount (tanks, piping, bearing zerk grease fittings)
COPYRIGHT 2021 Four Star Enterprises Pte.Ltd.  |  All Rights Reserved  |  Designed & Maintained by Web Dreams Pte Ltd